Replacing broken window glass clamps are a common fault with some window regulators.
Follow these steps for a secure fit.
1. Remove the window glass from the door and place on a flat surface then remove the
broken glass clamp and any remaining pieces from the glass.
2. Sand the spot where the old clamp was until rough but level and wipe off dust.
3. Apply small amount of Sikaflex 295 or T-REX Turbo Adhesive to the glass clamp and secure it to the
glass in place of the old clamp and refit.
4. Wind window up and leave to dry for a minimum of 24 hours before operating the
window.

Pack includes x2 Large Glass Clamp to fit Toyota models 2004 on wards.

Need a glass clamp for another model of vehicle? Send us an enquiry with the Year, Make and Model of your vehicle here.