Window Glass Clamps (2 pack) to fit following models:
Mitsubishi Triton MM MN
Toyota Camry 36S 40S

Replacing broken window glass clamps are a common fault with some window regulators.

Follow these steps for a secure fit.
1. Remove the window glass from the door and place on a flat surface then remove the
broken glass clamp and any remaining pieces from the glass.
2. Sand the spot where the old clamp was until rough but level and wipe off dust with clean rag.
3. Apply Sikaflex 295 or T-REX Turbo Adhesive to the glass clamp and secure it to the glass in place of the old clamp and refit.
4. Wind window up and leave to dry for a minimum of 12 hours before operating the
window.

LUBRICATE BAILEY CHANNEL WITH SILICONE SPRAY OR GRAPHITE POWDER

Pack includes x2 Glass Clamps.

Need a glass clamp for another model of vehicle? Send us an enquiry with the Year, Make and Model of your vehicle here.